Skip to content
Bluetooth Module for Acrylic Spas

Bluetooth Module for Acrylic Spas

We have exciting news for our Acrylic Spa owners! We now offer a Bluetooth module that can easily be installed on your Canadian Spa Company Hot Tub or Swim Spa. With this simple add-on, you can enjoy wireless music while relaxing anywhere in your spa.

Continue reading for our step-by-step instructions on how to easily install the Bluetooth Module on your Spa.

Step 1:

Remove the center and right cabinet panel on the Control side of your Spa.


Step 2:

Locate the amp power connector.

Step 3:

Unplug amp from transformer.

Step 4:

Connect DC/DC Connector to amp and transformer.

Step 5:

Remove audio cable from panel.

Step 6:

Fit USB wire of DC/DC Connector through hole in audio panel. *Note: you may need to enlarge this hole depending on which Spa model you own.

Step 7:

Fit audio auxiliary end of Audio Stabilizer through hole in audio panel.


Step 8:

Connect Audio Stabilizer to audio cable.

Step 9:

Re-attach Spa's cabinet panels.

Step 10:

Plug Bluetooth Module into USB.

Step 11:

Plug Audio Stabilizer into Bluetooth Module.

Step 12:

Connect device to Bluetooth (connect to H163) and enjoy your favorite music! You can still use the auxiliary cable to connect to your device when Bluetooth is not in use.

TIP: When Bluetooth is not in use, you can disconnect Bluetooth module from USB port and use USB port to charge your phone.


Older Post
Newer Post
Close (esc)


Use this popup to embed a mailing list sign up form. Alternatively use it as a simple call to action with a link to a product or a page.

Age verification

By clicking enter you are verifying that you are old enough to consume alcohol.


Added to cart